美化城市環境方面，動房在外型上好看，然后可以很有藝術的搭建在一起，兩個或者三個等等組合在一起，可以搭建出陽臺別墅，看上去十分美觀。而雜亂的工地使用了濟南工程板房之后變得整潔美觀了。

In terms of beautifying the urban environment, the movable houses are beautiful in appearance, and can be built together artistically. Two or three can be combined to build a balcony villa, which looks very beautiful. The messy construction site became clean and beautiful after using the plank houses of Jinan Project.

對工程板房的進場材料須驗收把關，嚴禁偷工減料、以次充好的材料進場。材料要按規范和產品質量要求驗收，標準如下：

The incoming materials of the project plank houses must be checked and accepted, and it is strictly forbidden to cut corners on work and materials, or use inferior materials as high-quality materials. The materials shall be accepted according to the specifications and product quality requirements, and the standards are as follows:

①鋼結構彩鋼板工程板房立桿柱底層所用的方鋼尺寸要求100㎜×100㎜，厚度達到2.5㎜，二層立桿柱所用的方鋼尺寸要求80㎜×80㎜，厚度達到2.5㎜，大梁、次梁用材角鋼須尺寸達到30㎜×30㎜，厚度達到3㎜，鋼材質量要求采用國標鋼材。

① The dimension of square steel used in the bottom layer of upright column of steel structure color steel plate project plank house is required to be 100 ㎜ × 100 ㎜, the thickness reaches 2.5 ㎜, and the dimension of square steel used for two-layer upright column is 80 ㎜ × 80 ㎜, thickness up to 2.5 ㎜, angle steel for girder and secondary beam must reach 30 ㎜ × 30 ㎜, the thickness reaches 3 ㎜, and the steel quality is required to adopt the national standard steel.

②進場彩鋼板質量，要符合質保書所要求的質量。

② The quality of mobilized color steel plate shall meet the quality requirements in the warranty.

③搭設工程板房所需電焊條應采用T422，其牌號應符合國標GB981-76要求。

③ T422 electrode shall be used for the construction of slab house, and its brand shall meet the requirements of national standard GB981-76.

④進場的大梁在制作中，應按產品要求規范作業，不允許偷工減料，按要求設置好斜角鐵及方鋼立桿。這是工程板房控制的重要部位，須嚴格把關。

④ During the fabrication of the girders entering the site, the work shall be carried out according to the product requirements. It is not allowed to cut corners. Angle iron and square steel poles shall be set as required. This is an important part of the safety control of the project plank house, which must be strictly controlled.

所以說對工程板房的進場材料須驗收把關，建議您多看看相關的標準，做到問題及時預防，更多相關內容就來我們網站http://nhmmgs.com咨詢吧！

So it is necessary to check the acceptance of the materials entering the project plank house. I suggest you check the relevant standards to prevent problems in a timely manner. More relevant content will come to our website http://nhmmgs.com Consult!